Recent content by aaquilato

  1. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    There are 2 HDMI inputs on this display. One is supposed to be for PC use. I had a page opened earlier which showed many resolution options for the HDMI PC connector. Of course neither of the 2 HDMI connections are labeled PC. I'll keep looking. Thanks for your help.
  2. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    LG webOS TV LJ550M Here's the link. I have the 42" model. https://www.lg.com/us/support/products/documents/LJ550M-Series-Spec-Sheet.pdf
  3. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    Next I'd like to try to fix the resolution, or lack of resolution choices I have. Now mind you, I'm using an LG TV display as my computer monitor. HDMI from the Radeon card directly into the display. When in it's native mode (1360 x 768) everything looks fantastic. I'm attaching 4 screen shots...
  4. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    That worked perfectly. Thank you Edhawk.
  5. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    This only changes it while booting that one time. What do I have to do to make this change permanent?
  6. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    Hey there Edhawk. Well, the Hack boots in verbose mode. How do I do the above? Let's take these changes one at a time. AQ.
  7. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    Hi Ed. I hope you and yours are well in this uncertain time we are experiencing. Can we pick up where we left off? I've got more than enough time at the moment. This system runs better than expected. There are a couple of minor things to be worked out but they don't stop me from working in...
  8. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    Hi Ed. Just wanted to circle back here. I'm using the Clover2 bootloader. I guess because of all the verbose stuff happening during the boot cycle I mislead you when I said the screen didn't flash during the GPU handoff. It does. It's just not that noticeable. Anyway, things seem OK now. Thanks...
  9. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    Hi Ed. The new Clover folder (Clover3) did not work. There is a screen flash about halfway through the Apple timeline and then a black screen. FYI... This flash was present all the time, in every boot scenario, as it is, as I understand, the GPU handoff. Oddly, it was not present using your...
  10. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    That was my bad. Since adding the GPU card the TV is connected directly to the RX 580.
  11. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    Now onto the new Clover folder. Which do I replace? The one on my HackHD or the one on the new CloverUSB drive?
  12. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    All those USB ports added together seem to be over the 15 port limit.
  13. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    This MB has an internal USB-C header which is connected to the front case USB-C port. The MB also has a USB3 header which is connected to the two USB3 ports on the front case. I'm having power issues with them. I can only use one at a time. The MB has two USB2 headers, of which I am only using...
  14. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    Ethernet is connected to the LAN port. CloverUSB drive is connected to the top USB2 port. Keyboard, mouse, trackpad are connected to a USB2 hub that is plugged into the bottom USB2 port. That's the rear i/o.
  15. A

    GA-Z270X-DESIGNARE for Pro Tools 12

    The HDMI port is connected to the LG monitor.