Search results

  1. pixyy

    Got a new 4K screen, but CustoMac does not allow select 4K resolution

    Just reporting back that after a tip on another forum, I disabled the framebuffer patches I had in Devices>Properties ('framebuffer-patch enable' set to 000000 and removed the 'framebuffer-stolenmem'=00003001) to allow WhateverGreen.kext to handle the necessary iGPU settings. This fixed my issue...
  2. pixyy

    Got a new 4K screen, but CustoMac does not allow select 4K resolution

    The AAPL,ig-platform-id is set to 07009B3E, which I believe is the correct value for Intel UHD630 on Coffee Lake. I had previously selected a new value from the dropdown in Graphics>ig-platform-id (based on Coffee Lake Desktop 3E920003) but got a kernel panic. I got the system booted by editing...
  3. pixyy

    Got a new 4K screen, but CustoMac does not allow select 4K resolution

    I tried with the LG supplied DisplayPort cable and god the screen menu does not have a setting for resolution, but does popo I also tried the supplied hdmi cable (never had the hackintosh connected through hdmi before) and it displayed a fully purple tinted picture
  4. pixyy

    Got a new 4K screen, but CustoMac does not allow select 4K resolution

    Thanks. I’m actually using a DisplayPort cable, but am not presented with the 4K option. Will try with the supplies mot just struck me that the iMac 18.1 I use in my smbios does not support 4K and if I should change it and what I should be aware of if I do.
  5. pixyy

    Got a new 4K screen, but CustoMac does not allow select 4K resolution

    I just got me an LG 27UL650-W, which is a 27" 4K screen and connected it to my CustoMac. The display settings indicate the system finds the color profile for 'LG HDR 4K but the Display settings do not show an option for 3840x2160 resolution (selecting manual scaling shows max...
  6. pixyy

    "This Device cannot be transferred error", due to Serial Number?

    I finally got myself to contact Apple support. Took a looong time before I got to someone who actually understood the problem (too many junior technicians going through their checklists), but finally got them to reset the devices on my accounts and the error message disappeared. Thanks for all...
  7. pixyy

    "This Device cannot be transferred error", due to Serial Number?

    Thanks. The Hack is not listed. I may just wait the 3 months, though it just seems so trivial. Would Apple Support ask for a Serial Number and verify that it is not an authorized Serial?
  8. pixyy

    "This Device cannot be transferred error", due to Serial Number?

    1. serial number checked with Everymac. OK 2. Serial Number Checked with Apple support. OK 3. The Board Serial Number was not used to populate the MLB option. I pasted it in and saved the plist. Then I logged out of iTunes and deauthorized the Hackintosh. Rebooted, logged in, re-authorized...
  9. pixyy

    "This Device cannot be transferred error", due to Serial Number?

    Thanks for clarifying the Serial Number context. I've only ever had one Apple ID and the machine is authorized to this ID. I'm signed in with my apple ID, can see my Apple music (family) subscription and the local library of music saved on the machine. The error only pops up when I try to...
  10. pixyy

    "This Device cannot be transferred error", due to Serial Number?

    Hi, I'm happily using my hackintosh, however in my iTunes library, I am not able to download music. I am logged in with my Apple ID, it syncs my library, but when I try to download I get this error: I can see some Mac users suggest contacting Apple support, but that would be a bit hard to do...
  11. pixyy

    Custom SSDT

    I'll have a look at the Hackintool route. Thanks. I'll hopefully have some time this weekend. I do notice this guide also mentions the "Reboot with -uia_exclude_hs boot flag and remove the -uia_exclude_ss boot flag" instruction. Is this boot flag set in cloverconfigurator and saved on the...
  12. pixyy

    Custom SSDT

    I loaded the new Clover folder and restarted. It did not change the USB situation, unfortunately. It did seem to really optimize the system - for lack of a better description, before it always seemed to work at full capacity, even when very few processes were running, and it was running hot...
  13. pixyy

    Custom SSDT

    I applied the USB Port Limit Patch above (and disabled the previous one). Does not seem to change anything in my USB ports (still showing only HS ports in IOReg) Thanks very much for all your assistance and for preparing the SSDT template for my motherboard. Much appreciated. I'm attaching a...
  14. pixyy

    Custom SSDT

    I don't have a USB printer of any kind. Must have added these kext in a previous desperate attempt to make my Bluetooth work? I have removed "FixUSB" and "FixHPET" options from config.plist. This did not seem to change anything in IOreg after reboot. I also removed VirtualSMC and replaced with...
  15. pixyy

    Custom SSDT

    I Don't believe I added them. Can they be part of the OS? I removed, ran Kext Utility. It did not seem to change anything for my USB3 ports...
  16. pixyy

    Custom SSDT

    I figured something musy be wrong since they are not registering as USB3. I have XHCI amd XHC1 patches in my config.plist I also have the following kext patches (one for USB) These are the kexts that are in my L/E folder (Clover/kexts/others only contains Lilu.kext and VirtualSMC.kext with...
  17. pixyy

    Custom SSDT

    Even though I'm still clearly out of my depth, I am trying to create a custom SSDT for my Hackintosh based on this kind overview from EdHawk...
  18. pixyy

    10.14.3 update issues (and possibly others I've gotten myself into)

    Just wanted to report back with some good news! Did not seem like Intel-injection was the problem (it was was not selected in Clover) Positive site effect: My Bluetooth suddenly worked (as per other thread)!! After some reboots and turning some USB injection on/off, I got into the system. I...
  19. pixyy

    10.14.3 update issues (and possibly others I've gotten myself into)

    I have attempted the terminal command after booting as a single user. Got the message that S/L/E is a read only library. Don’t know if that means if anything has happened. After rebooting I first got a kernel panic. After booting again I got stuck on the screen below. The last few lines took a...
  20. pixyy

    10.14.3 update issues (and possibly others I've gotten myself into)

    Short answer: no Longer answer: ohnoooooo!