[GUIDE] HOW-TO: Properly Map Your USB Ports for OpenCore/Big Sur 11.4

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.7
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#61
Try connector type '9' in place of '10'.

See if that makes any difference as there are two settings that can be used for Type-C USB ports.
 

YaPaY

New member
Joined
Jul 29, 2021
macOS
10.16.0
Mobo
Gigabyte Z390 I Aerous Wifi
CPU
i5-9600K
GPU
Intel 630
#62
Try connector type '9' in place of '10'.

See if that makes any difference as there are two settings that can be used for Type-C USB ports.
thanks for your help. 9 fixed the problem.
BTW, should I use the the other *.aml files which extracted from Hackintool?
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.7
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#63
Which other *.aml files?

If you mean the SSDT-UIAC.aml or then no. You don't want to use this SSDT and the USBPorts.kext at the same time.

If you mean the SSDT-USBX.aml then possibly, as this is a custom SSDT for usb power. It all depends on whether you have an existing SSDT-EC-USBX.aml in you setup. You would only want to use this SSDT-USBX.aml if you have a standalone custom SSDT-EC.aml.
 

Latest posts