Install issue - I'm stuck.

Josh Levi

New member
Joined
Oct 30, 2020
macOS
10.15.6
Mobo
MSI Mortar B460m Wifi
CPU
i9 10850k
GPU
ASUS ROG RX5700XT OC
#1
Hi all! N00b here!

Busy with my first build and have hit a Snag. Ive been building from Dortania's Opencore guide and no matter what I do I get this prompt in install: "This version of Mac OS X is not supported on this platform!"

UPDATE: I got past is running a iMac19,2 SMBIOS. Now I'm stuck a bit later. My TXT file with the errors is attached! (UPDATED)

Mobo: B460m Mortar wifi
CPU: i9 10850k
GPU Asus Rog Strix RX5700XT
OS 10.15.6


I've included my error file & config.plist

Thanks guys!
 

Attachments

Last edited:
Joined
Oct 30, 2020
macOS
10.15.3
CPU
Intel i5 4 core
GPU
Hd 4000 intel
#2
If your trying to build a hackintosh, the hard drive your gonna install Mac os on must be formatted for mac, you can do this with transmac. Note, when doing so you must use a title that you will also use when creating the usb installer or it will boot up and run to the install on hard drive section and give you error you need to restart you device and try again. Hope this helps you.
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#3
@BADboy1976 that't not correct.

You can use a previously NTFS formatted drive, you just need to remember to Erase the drive with Disk Utility and format it as GUID/APFS, before you proceed with the installation.