NVME Clover Boot.

Cruality

New member
Joined
Feb 2, 2018
macOS
10.13.3
Mobo
Gigabyte Z370 Aorus Gaming 7
CPU
i7 8700k
GPU
MSI Geforce GTX 1070 Ti
#1
Hi,

I had a good configuration since few month with 2 SSD (one for OS X and one for Win10).

Today, i bought a new disk, a NVME SSD. It's well recognize with my motherboard.
I install windows 10 UEFI Mode. it works well.

The problem is when i start my computer, clover don't find the new NVME. I can boot with my 2 others SSD.
On OSX, i can go on the NVME Disk called Bootcamp so it well recognize.

I think, it's just a detail on my config. Any idea?
Thanks
 

Cruality

New member
Joined
Feb 2, 2018
macOS
10.13.3
Mobo
Gigabyte Z370 Aorus Gaming 7
CPU
i7 8700k
GPU
MSI Geforce GTX 1070 Ti
#3
This is don’t work. It was for 10.12, there is a native support on 10.13.
I don’t understand what’s wrong!
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#4
If you confirm the make/ model/ size of your NVME drive we may be able to provide some assistance.

Plus your NVME drive working OOB in High Sierra would depend on the following:
  • The drive having a block size of 512 bytes not 4k.
  • Your NVME drive not being one of the LiteOn/Plextor/Hynix SSDs that require additional fixes.
Boot to your old SSD while you have your NVME drive installed, then have a look at DCPIManger 'Status' tab and see how the NVME drive is formatted.

See the attached screenshot showing my drives etc. Two SSD's at 512 and Two WD drives at 4096

Screen Shot 2018-05-26 at 15.42.42.png
 

Latest posts