"please go to https://panic.apple.com to report this panic"

zivi

New member
Joined
Aug 11, 2019
macOS
10.14.6
Mobo
Gigabyte Z390 Gaming M
CPU
i7 8700k
GPU
Sapphire Radeon RX 580 Nitro+
#1
I'm trying to install Mojave 10.14.6 and keep getting this message: "please go to https://panic.apple.com to report this panic".

This is what my screen looks like:
IMG_4603.JPG


I can't really find any solutions for it so I would greatly appreciate if anyone can link me a solution or know how to solve the problem.

Here's my EFI if that's useful.
 

Attachments

Last edited:

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#2
Here is a revised CLOVER folder for you to use. Replace the one on your USB pen drive with the one attached. It should work better for you.

Let me know how you get on.
 

Attachments

zivi

New member
Joined
Aug 11, 2019
macOS
10.14.6
Mobo
Gigabyte Z390 Gaming M
CPU
i7 8700k
GPU
Sapphire Radeon RX 580 Nitro+
#3
When booting with that EFI configuration my screen just goes black right around here:

IMG_4614.JPG

I have absolutely no idea why this could be.
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#4
It is caused by a graphics issue.

I will have a look at what I have provided in the CLOVER folder from post #2 and see if I made an error with the graphics settings.
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#5
I had the ig-platform-id set different to the Devices AAPL,ig-platform-id, both for Coffee lake CPU but not identical. Try this config.plist with the CLOVER folder and see if this helps.
 

Attachments

zivi

New member
Joined
Aug 11, 2019
macOS
10.14.6
Mobo
Gigabyte Z390 Gaming M
CPU
i7 8700k
GPU
Sapphire Radeon RX 580 Nitro+
#6
When I try boot into my usb installer from the BIOS it just goes directly back there after a second.
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#7
Sorry when you do what? I don't know what you mean when you say you boot the USB Drive from the bios. Are you setting it as the priority boot entry, are you sure you are selecting the correct USB Drive entry. There are usually two USB entries, one will be UEFI+ Name of the Drive the other just the name of the Drive.

The simplest way to boot your USB is to press the F12 key when you boot and arrive on the Gigabyte motherboard splash screen, this will provide a list of all the bootable entries in your system. You need to select the UEFI entry for the USB Drive. This should take you to the Clover boot screen.
 

zivi

New member
Joined
Aug 11, 2019
macOS
10.14.6
Mobo
Gigabyte Z390 Gaming M
CPU
i7 8700k
GPU
Sapphire Radeon RX 580 Nitro+
#8
Yeah, that's exactly what I did. Apologies for the bad explanation.
Here's a little video of what happens:
View: https://youtu.be/e37Jtg_9LCU


I'm using exactly the files you sent me.
 
Joined
Aug 18, 2019
macOS
10.14.5
Mobo
Gigabyte B360 HD3
CPU
Intel Core i3-9100F
GPU
MSI Radeon RX 560 AERO ITX 4G OC
#9
To get to the original error message that you posted ("panic - uninterruptible processor"): on my system I had this error when the installer tried to reboot. I could fix this by adding EmuVariableUefi-64.efi to the /EFI/CLOVER/drivers64UEFI/ folder and add slide=0 to the clover boot flags. I found this in another forum where another two people had this problem and could fix it this way.
 

zivi

New member
Joined
Aug 11, 2019
macOS
10.14.6
Mobo
Gigabyte Z390 Gaming M
CPU
i7 8700k
GPU
Sapphire Radeon RX 580 Nitro+
#10
To get to the original error message that you posted ("panic - uninterruptible processor"): on my system I had this error when the installer tried to reboot. I could fix this by adding EmuVariableUefi-64.efi to the /EFI/CLOVER/drivers64UEFI/ folder and add slide=0 to the clover boot flags. I found this in another forum where another two people had this problem and could fix it this way.
Thank you for the suggestion but every time I try to boot with EmuVariableUefi-64.efi, I get the "couldn't allocate kernel cache (0x9)" error
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#11
I would recommend you clear your bios. This can be done by either removing the CMOS battery from the motherboard for 30 seconds, or connecting the 'CLR CMOS' pins (can be found above the front panel connector on the motherboard).

BATTERY REMOVAL:
You may clear the CMOS values by removing the battery:
  1. Turn off your computer and unplug the power cord.
  2. Gently remove the battery from the battery holder and wait for one minute. (Or use a metal object like a screwdriver to touch the positive and negative terminals of the battery holder, making them short for 5 seconds.)
  3. Replace the battery.
  4. Plug in the power cord and restart your computer.

CLR_CMOS (Clear CMOS Jumper)

Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
  • Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values.
  • After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations).

Once you have selected and confirmed the 'Load Optimized Defaults', you need to make sure you have these other bios settings entered correctly:
  1. Virtualization : Enabled
  2. VT-d : Disabled
  3. XHCI Hand-Off : Enabled
  4. Legacy USB Support: Auto/Enabled
  5. IO SerialPort : Disabled
  6. Network Stack : Disabled
  7. XMP Profile : Auto / Profile 1/Enabled
  8. UEFI Booting set to Enabled and set Priority over Legacy
  9. Secure Boot : Disabled
  10. Fast Boot : Disabled
  11. OS Type: Other OS
  12. Wake on LAN : Disabled

For your Dedicated Graphics + Integrated graphics card:
  1. Integrated Graphics : Enabled
  2. Graphics: PEG/PCIe Slot 1
  3. Initial Display Output : PCIe 1 Slot
  4. DVMT Pre-Allocated : 128M or higher

You should then be able to set your boot priority so your USB and then your macOS drive are in the correct order.
 

zivi

New member
Joined
Aug 11, 2019
macOS
10.14.6
Mobo
Gigabyte Z390 Gaming M
CPU
i7 8700k
GPU
Sapphire Radeon RX 580 Nitro+
#12
Where do I find virtualisation on a Gigabyte motherboard's bios?
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#13
For your Gigabyte Z390 Gaming M's bios the Vd-t (virtualization) option can be found on the Chipset tab. See Section 2.7, page 36 in the attached User Manual.
 

Attachments

zivi

New member
Joined
Aug 11, 2019
macOS
10.14.6
Mobo
Gigabyte Z390 Gaming M
CPU
i7 8700k
GPU
Sapphire Radeon RX 580 Nitro+
#14
You said before that I should keep virtualisation enabled and VT-d disabled, but they're the same thing. What should I do?
 

zivi

New member
Joined
Aug 11, 2019
macOS
10.14.6
Mobo
Gigabyte Z390 Gaming M
CPU
i7 8700k
GPU
Sapphire Radeon RX 580 Nitro+
#15
I tried turning VT-d on just to see what would happen and it booted! it installed Mojave on my SSD too but now when im booting from it it's just stuck at the apple logo (after all the debug messages from verbose) with an empty progress bar
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#16
VT-d should be disabled in your bios.

You may not have another Bios option to set Virtualization=Enabled
 

zivi

New member
Joined
Aug 11, 2019
macOS
10.14.6
Mobo
Gigabyte Z390 Gaming M
CPU
i7 8700k
GPU
Sapphire Radeon RX 580 Nitro+
#17
When I try booting without VT-d enabled it does what I showed in the video.
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#18
Add the 'dart=0' boot argument to the BOOT section in your config.plist, this should disable VT-d.
 

Edhawk

Moderator
Joined
Apr 10, 2018
macOS
10.15.5
Mobo
GA-Z97X-UD5H
CPU
i7-4790K
GPU
Powercolor RX 580 8GB
#19
Check your Bios for VT-d option and disable it.

Alternatively try adding the 'dart=0' boot argument to your config.plist
 

Latest posts