How-to Make a Clover Hackintosh Bootloader

What’s Needed:

In this tutorial we will be creating the bootloader that will allow you to run the macOS installer that will also be created in this guide onto your to-be Hackintosh. This will be created using a flash drive that needs to be 8GB or larger in size so that it has enough space ton hold the Sierra or El Capitan installer files.

You’ll need to be running macOS in order to complete this guide. If you do not have a mac available for use, you can learn how to create a virtual machine on your computer before following this guide:

Virtual macOS: Use macOS Sierra on a Virtual Machine with VMWare





STEP 1: Creating the macOS Installer

The first step to making a hackintosh is transferring the macOS install files to a USB flash drive to do that follow the guide: How to make a macOS flash drive installer

STEP 2: Setting up the EFI Boot Partition

    1. Open Clover EFI Bootloader
    2. Click Continue
    3. Click Continue again
    4. Click Change Install Location…
    5. Select your Flash Drive

  1. Click Continue
  2. Click Customize
  3. Check the following boxes:
    • Check Install for UEFI booting only (this will also select Install Clover in the ESP)
    • Drivers64UEFI > EmuVariableUefi-64
    • Drivers64UEFI > OsxAptioFix2DrV-64
    • Drivers64UEFI > PartitionDxe-64

  4. Click Install
  5. Enter Passowrd and click Install Software
  6. Click Close
  7. Click Keep if it prompts

Next Step

Now that you have created a USB Installer you will need to make it bootable on your PC.

If you are following one of our custom Build Guides return to that guide for custom boot steps.

Otherwise follow our general guild on How-to Make Your Hackintosh Installer Bootable

Leave a Reply

3 Comments on "How-to Make a Clover Hackintosh Bootloader"

avatar
Sort by:   newest | oldest
trackback

[…] This guide will walk you through the steps  assuming that you are using Clover EFI bootloader. If you do not yet have a Clover bootable learn how to by following the Clover EFI Bootloader Guide […]

coulon
Guest
coulon

Hi,

i’m a new hackintosher and i would know what to do after create a usb via vmware.

Do i install multibeast 7 or only clover EFI v2 ?

My config : gigabyte z170mx gaming 5 – I7 6700k – 16 go ballistix and a evga geforce GTX 1060 SSC 6Go DDR5.

Thanks a lot for your return